China Homwing The Newest Small Size Hst-IV Series Harmonic Reducer Gearbox with Great quality

Item Description

Solution Description:

one.Flexspline is a hollow flanging normal cylinder construction.

two.There is a massive-diameter hollow shaft gap in the center of the cam of the wave generator. The inside style of the reducer has a assistance bearing.

3.It has a entirely sealed construction and is straightforward to install. It is really suitable for the situations where the wire needs to be threaded from the heart of the reducer.

Rewards:

The 1st:High precision,higher torque

The next:dedicated specialized personnel can be on-the-go to supply design and style solutions

The 3rd:Manufacturing unit immediate income fantastic workmanship sturdy high quality assurance

The fourth:Item high quality concerns have a a single-calendar year warranty time, can be returned for alternative or repair

Company profile:

 

HangZhou CZPT Technological innovation Co., Ltd. proven in 2014, is fully commited to the R & D plant of substantial-precision transmission parts. At present, the yearly generation capability can reach 45000 sets of harmonic reducers. We firmly believe in quality 1st. All backlinks from uncooked resources to concluded items are strictly supervised and managed, which offers a CZPT foundation for solution high quality. Our merchandise are sold all over the place and overseas.

The harmonic reducer and other high-precision transmission components ended up independently created by the company. Our company spends twenty% of its income every single yr on the study and development of new technologies in the sector. There are 5 folks in R & D.

Our benefit is as beneath:

one.7 many years of marketing and advertising encounter

two. 5-man or woman R & D group to give you with technological support

3. It is marketed at house and abroad and exported to Turkey and Eire

four. The merchandise high quality is guaranteed with a a single-yr warranty

5. Merchandise can be custom-made

Power manufacturing facility:

Our plant has an complete campus The quantity of workshops is close to three hundred No matter whether it truly is from the creation of raw resources and the procurement of uncooked components to the inspection of completed items, we’re undertaking it ourselves. There is a full generation system

HST-III Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at start stop The allowable optimum of the average load torque Maximum torque is permitted in an immediate Allow the highest pace to be entered Regular enter speed is authorized Back hole design and style life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 fifty six.2 .six 20.7 two.one 7.9 .7 40.three 4.one 7000 3000 ≤30 10000
80 nine .9 27 two.seven twelve.seven 1.3 54.one 5.5
a hundred nine .9 32 3.three twelve.7 1.three 62.one six.3
17 50 18.four one.nine 39 4 29.9 3 80.five eight.2 6500 3000 ≤30 15000
80 twenty five.3 2.6 forty nine.five 5 31 three.2 a hundred.1 10.2
one hundred 27.6 two.8 62 six.three forty five 4.6 124.2 12.seven
20 fifty 28.8 2.9 sixty four.4 6.six 39 4 112.7 11.five 5600 3000 ≤30 15000
eighty 39.one four eighty five 8.eight fifty four 5.five 146.1 14.nine
one hundred forty six 4.seven 94.3 9.6 56 five.eight 169.one seventeen.2
one hundred twenty forty six four.seven 100 ten.two fifty six 5.eight 169.1 17.2
160 forty six four.seven a hundred ten.2 56 5.8 169.one 17.two
25 50 forty four.nine 4.six 113 11.five sixty three six.five 213.nine 21.eight 4800 3000 ≤30 15000
eighty seventy two.5 seven.four 158 sixteen.1 one hundred 10.two 293.3 29.nine
a hundred seventy seven.1 7.nine 181 18.four 124 twelve.seven 326.six 33.three
one hundred twenty 77.one 7.nine 192 19.six 124 12.7 349.6 35.six
32 fifty 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 a hundred thirty five.7 thirteen.8 350 35.six 192 19.six 653 sixty six.six
a hundred 157.6 sixteen.1 383 39.one 248 25.three 744 75.nine
40 a hundred 308 37.two 660 sixty seven 432 44 1232 126.seven 4000 3000 ≤30 15000

HSG Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at start off cease The allowable greatest of the typical load torque Maximum torque is allowed in an instant Allow the maximum pace to be entered Common enter pace is authorized Again gap design and style lifestyle
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 fifty seven .seven 23 2.3 nine .9 forty six four.seven 14000 8500 ≤20 15000
80 ten 1 thirty three.1 fourteen one.4 61 6.two
one hundred ten 1 36 3.7 14 1.4 70 7.2
17 fifty 21 two.one 44 four.five 34 three.four 91 nine 10000 7300 ≤20 20000
eighty 29 2.9 56 5.seven 35 three.6 113 twelve
a hundred 31 three.two 70 7.two fifty one five.two 143 15
20 fifty 33 3.3 seventy three 7.4 forty four 4.five 127 13 10000 6500 ≤20 20000
80 forty four four.5 ninety six 9.8 sixty one six.2 165 17
a hundred fifty two 5.3 107 10.nine sixty four 6.5 191 twenty
one hundred twenty fifty two 5.three 113 11.five 64 6.five 191 twenty
160 52 5.three 120 12.2 64 six.five 191 20
25 50 fifty one 5.2 127 thirteen 72 7.3 242 twenty five 7500 5600 ≤20 20000
80 eighty two 8.4 178 18 113 twelve 332 34
one hundred 87 8.9 204 21 140 fourteen 369 38
one hundred twenty 87 eight.nine 217 22 one hundred forty fourteen 395 40
32 50 99 ten 281 29 a hundred and forty fourteen 497 fifty one 7000 4800 ≤20 20000
80 153 sixteen 395 40 217 22 738 seventy five
one hundred 178 18 433 forty four 281 29 841 86
forty a hundred 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

Exhibition:

Software scenario:

FQA:
Q: What should I provide when I select gearbox/speed reducer?
A: The greatest way is to give the motor drawing with parameter. Our engineer will examine and advise the most ideal gearbox model for your refer.
Or you can also provide below specification as well:
one) Sort, product and torque.
two) Ratio or output velocity
3) Doing work condition and link strategy
four) High quality and put in machine name
five) Enter mode and input pace
six) Motor manufacturer model or flange and motor shaft size

US $523.8
/ Piece
| 		1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000
US $523.8
/ Piece
| 		1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

Choosing an Agricultural Gearbox

When it comes to choosing an agricultural gearbox, you may be wondering which one is right for you. The right gearbox for your tractor is important for several reasons. Here are some factors to consider. This article will provide an overview of these components. These parts include the Bevel gearbox, the Surface finish, Ellipticity, Bearings, and more. CZPT P/L offers a range of gearboxes for many different agricultural applications. The company’s PTO Speed Reducer/Increaser is specially designed to maintain the original rotation of PTO output.
agriculturalparts

Bevel gearboxes

Agricultural bevel gearboxes have high load capacity, making them an excellent choice for heavy-duty machines. Bevel gearing is also popular in mechanical transmission systems, such as those found on tractor transmission systems. Modern harvesters and other agricultural equipment require high-performance gearboxes to maintain efficient performance. To meet these requirements, agricultural equipment OEMs trust the Bevel gearboxes manufactured by CZPT Gearbox Company.
Unlike conventional worm gears, bevel gears use multiple shafts to transmit power. The bevel gears have three types of shafts, namely, hollow, projecting, and double-extended. In addition to being hollow, bevel gears can have additional shafts installed opposite the input shaft. They are available in a standard mount, aluminum housing, and three shaft types: double-extended, hollow, and projecting.
Agricultural bevel gearboxes are typically made from closed-grain cast-iron, although higher-sized models are made from SG 500/7 material. The screw is made from Cr-Mo medium carbon steel, which is hardened and tempered to maintain high core strength. A tapered roller bearing is mounted in the housing and is designed to carry heavy axial and radial loads. These gearboxes are also widely used in mixing, distribution, and cleaning machinery.
Bevel gearboxes for agricultural equipment are primarily used in agricultural machinery applications. Agricultural machinery often uses a PTO to transmit torque, but can only provide it at low speeds. Because of this, gearboxes are used for low-speed, massive-torque applications. Soil preparation and crop treatment are two common uses for these gearboxes. They are also useful in cement mixers.

Surface finish

In engineered gearboxes, the surface finish of the gear tooth surfaces is critical for smooth operation. Microscopic examination of gear tooth surfaces reveals a fine, unidirectional pattern. Traditionally used finishing methods include hob shaving, gear grinding, and honing. These techniques can improve the overall finish, but they also have their drawbacks. To overcome these problems, manufacturers use modern machine tooling techniques.
Agricultural gearboxes must be free from casting defects and mechanical damage. The processing surface must be flawless, with the ellipticity of the shaft hole no greater than 0.02 mm, and the centerline unevenness of the shaft holes is less than 0.015 mm. The relationship between shafts and bearing housing must be within 0.6 mm. These standards are crucial for the operation of agricultural machinery gearboxes.
Earlier, the gears were made of H11 and H13 tool steel, which progressively weakened after 20 gears. The tempering temperature is five to seven degrees Celsius or ten degrees Fahrenheit, depending on the steel used. To address this problem, Alloy 718 was developed. The alloy improved the life of die inserts, which reduced the overall cost. Further, the improved surface finish of agricultural gearboxes helped the customers reduce operating costs.
agriculturalparts

Ellipticity

A number of tasks require the use of an agricultural gearbox. These tasks can range from gardening to maintaining green spaces. These gearboxes transmit power from the input shaft to the output shaft, facilitating the change in direction, speed, or rotation. A quality gearbox is vital for the performance of agricultural machinery. Consider the type of operation you will be performing before buying one. You will also need to decide whether you will lubricate it.
An CZPT P/L Gearbox is one of their products. The company offers a full line of agricultural gearboxes at competitive prices. These gearboxes are designed to reduce input shaft speed and increase the PTO speed. The PTO Speed Reducer/Increaser is specially designed for this application. It helps maintain the original rotation of the PTO output shaft. It is suitable for various agricultural applications, including harvesters, balers, and cultivators.
An agricultural gearbox has an elliptic nature. It rotates around an axle core 90 degrees to create a bias state. The axle core of an agricultural gearbox rotates at a 90-degree angle to keep the shaft of the farming arbor in a neutral state. The bias state reduces the rotary driving force and reduces the amount of energy used in the operation. If a gearbox is designed correctly, it will keep a desired rotation torque.

Bearings

Agricultural gearboxes require high-quality bearings, and the global market is undergoing a transformation as more agricultural equipment becomes mechanized. The demand for bearings in agricultural equipment is expected to increase in the future, as cropping cycles will become shorter, and machinery will be used more intensively. Consequently, the wear on agricultural gear teeth and bearings will increase. This will result in a higher replacement rate for these parts.
Agricultural gearboxes must be able to withstand the high demands placed on them by the mounted farming implements. Harrows are a common example, and their disc-shaped attachments work to mix the top layer of soil. Because of their high demands, they must rotate continuously, and no matter what the terrain, they must be easy to run. Moreover, customised bearings will provide better seals.
In a study of 53 different agricultural gearboxes conducted by CZPT UK, they simulated 73 gear selections to find the right type of bearing. The simulation model took four weeks to set up and seven hours to run. As a result, CZPT always selects the “best bearing for the job” – a fitting solution. As such, CZPT understands the end user’s needs.
agriculturalparts

Quality of materials

Agricultural gearboxes play a vital role in the production of food. With the world’s population increasing, the need for food will also increase, and that means a greater need for efficient gearboxes. To make this happen, gearboxes must be able to withstand a variety of environmental conditions, including high and low temperatures, operation in arid and moist environments, and safety regulations.
A bevel gearbox has spiral bevel pinions that transmit rotational power to the axle. It is used in a variety of agricultural applications and is available in a range of ratios, horsepower, and configurations. This right-angle gear drive is widely used in portable grain elevators and grain carts. It has a 15-mm shaft diameter and is compatible with offset rotary fillers and hollow output shafts.
The gear box of a tractor is usually made of grey cast iron. Grey cast iron is a great choice for this component because it provides good wear resistance and vibration dampening. Belt pulleys are also made from grey cast iron. Large belt pulleys are made by casting processes. Similarly, the brake drum material needs to be high-quality to be effective. It is generally made of grey iron ASTM A48 Class 35.
China Homwing The Newest Small Size Hst-IV Series Harmonic Reducer Gearbox with Great quality China Homwing The Newest Small Size Hst-IV Series Harmonic Reducer Gearbox with Great quality
editor by czh 2023-04-03

Tags: china gearbox | gearbox | gearbox china | gearbox reducer | gearbox with | harmonic gearbox | harmonic reducer | reducer | reducer gearbox | small gearbox | the gearbox

Recent Posts

gearbox agricultural

As one of leading gearbox agricultural manufacturers, suppliers and exporters of mechanical products, We offer gearbox agricultural and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox agricultural.