China Homwing The Newest Small Size Hst-IV Series Harmonic Reducer Gearbox with Great quality

Item Description

Solution Description:

one.Flexspline is a hollow flanging normal cylinder construction.

two.There is a massive-diameter hollow shaft gap in the center of the cam of the wave generator. The inside style of the reducer has a assistance bearing.

3.It has a entirely sealed construction and is straightforward to install. It is really suitable for the situations where the wire needs to be threaded from the heart of the reducer.

Rewards:

The 1st:High precision,higher torque

The next:dedicated specialized personnel can be on-the-go to supply design and style solutions

The 3rd:Manufacturing unit immediate income fantastic workmanship sturdy high quality assurance

The fourth:Item high quality concerns have a a single-calendar year warranty time, can be returned for alternative or repair

Company profile:

HangZhou CZPT Technological innovation Co., Ltd. proven in 2014, is fully commited to the R & D plant of substantial-precision transmission parts. At present, the yearly generation capability can reach 45000 sets of harmonic reducers. We firmly believe in quality 1st. All backlinks from uncooked resources to concluded items are strictly supervised and managed, which offers a CZPT foundation for solution high quality. Our merchandise are sold all over the place and overseas.

The harmonic reducer and other high-precision transmission components ended up independently created by the company. Our company spends twenty% of its income every single yr on the study and development of new technologies in the sector. There are 5 folks in R & D.

Our benefit is as beneath:

one.7 many years of marketing and advertising encounter

two. 5-man or woman R & D group to give you with technological support

3. It is marketed at house and abroad and exported to Turkey and Eire

four. The merchandise high quality is guaranteed with a a single-yr warranty

5. Merchandise can be custom-made

Power manufacturing facility:

Our plant has an complete campus The quantity of workshops is close to three hundred No matter whether it truly is from the creation of raw resources and the procurement of uncooked components to the inspection of completed items, we’re undertaking it ourselves. There is a full generation system

HST-III Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at start stop		The allowable optimum of the average load torque		Maximum torque is permitted in an immediate		Allow the highest pace to be entered	Regular enter speed is authorized	Back hole	design and style life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	fifty	six.2	.six	20.7	two.one	7.9	.7	40.three	4.one	7000	3000	≤30	10000
	80	nine	.9	27	two.seven	twelve.seven	1.3	54.one	5.5
	a hundred	nine	.9	32	3.three	twelve.7	1.three	62.one	six.3
17	50	18.four	one.nine	39	4	29.9	3	80.five	eight.2	6500	3000	≤30	15000
	80	twenty five.3	2.6	forty nine.five	5	31	three.2	a hundred.1	10.2
	one hundred	27.6	two.8	62	six.three	forty five	4.6	124.2	12.seven
20	fifty	28.8	2.9	sixty four.4	6.six	39	4	112.7	11.five	5600	3000	≤30	15000
	eighty	39.one	four	eighty five	8.eight	fifty four	5.five	146.1	14.nine
	one hundred	forty six	4.seven	94.3	9.6	56	five.eight	169.one	seventeen.2
	one hundred twenty	forty six	four.seven	100	ten.two	fifty six	5.eight	169.1	17.2
	160	forty six	four.seven	a hundred	ten.2	56	5.8	169.one	17.two
25	50	forty four.nine	4.six	113	11.five	sixty three	six.five	213.nine	21.eight	4800	3000	≤30	15000
	eighty	seventy two.5	seven.four	158	sixteen.1	one hundred	10.two	293.3	29.nine
	a hundred	seventy seven.1	7.nine	181	18.four	124	twelve.seven	326.six	33.three
	one hundred twenty	77.one	7.nine	192	19.six	124	12.7	349.6	35.six
32	fifty	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	a hundred thirty five.7	thirteen.8	350	35.six	192	19.six	653	sixty six.six
	a hundred	157.6	sixteen.1	383	39.one	248	25.three	744	75.nine
40	a hundred	308	37.two	660	sixty seven	432	44	1232	126.seven	4000	3000	≤30	15000

HSG Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at start off cease		The allowable greatest of the typical load torque		Maximum torque is allowed in an instant		Allow the maximum pace to be entered	Common enter pace is authorized	Again gap	design and style lifestyle
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	fifty	seven	.seven	23	2.3	nine	.9	forty six	four.seven	14000	8500	≤20	15000
	80	ten	1	thirty	three.1	fourteen	one.4	61	6.two
	one hundred	ten	1	36	3.7	14	1.4	70	7.2
17	fifty	21	two.one	44	four.five	34	three.four	91	nine	10000	7300	≤20	20000
	eighty	29	2.9	56	5.seven	35	three.6	113	twelve
	a hundred	31	three.two	70	7.two	fifty one	five.two	143	15
20	fifty	33	3.3	seventy three	7.4	forty four	4.five	127	13	10000	6500	≤20	20000
	80	forty four	four.5	ninety six	9.8	sixty one	six.2	165	17
	a hundred	fifty two	5.3	107	10.nine	sixty four	6.5	191	twenty
	one hundred twenty	fifty two	5.three	113	11.five	64	6.five	191	twenty
	160	52	5.three	120	12.2	64	six.five	191	20
25	50	fifty one	5.2	127	thirteen	72	7.3	242	twenty five	7500	5600	≤20	20000
	80	eighty two	8.4	178	18	113	twelve	332	34
	one hundred	87	8.9	204	21	140	fourteen	369	38
	one hundred twenty	87	eight.nine	217	22	one hundred forty	fourteen	395	40
32	50	99	ten	281	29	a hundred and forty	fourteen	497	fifty one	7000	4800	≤20	20000
	80	153	sixteen	395	40	217	22	738	seventy five
	one hundred	178	18	433	forty four	281	29	841	86
forty	a hundred	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

Exhibition:

Software scenario:

FQA:
Q: What should I provide when I select gearbox/speed reducer?
A: The greatest way is to give the motor drawing with parameter. Our engineer will examine and advise the most ideal gearbox model for your refer.
Or you can also provide below specification as well:
one) Sort, product and torque.
two) Ratio or output velocity
3) Doing work condition and link strategy
four) High quality and put in machine name
five) Enter mode and input pace
six) Motor manufacturer model or flange and motor shaft size

US $523.8
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

US $523.8
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

Choosing an Agricultural Gearbox

When it comes to choosing an agricultural gearbox, you may be wondering which one is right for you. The right gearbox for your tractor is important for several reasons. Here are some factors to consider. This article will provide an overview of these components. These parts include the Bevel gearbox, the Surface finish, Ellipticity, Bearings, and more. CZPT P/L offers a range of gearboxes for many different agricultural applications. The company’s PTO Speed Reducer/Increaser is specially designed to maintain the original rotation of PTO output.
agriculturalparts

Bevel gearboxes

Agricultural bevel gearboxes have high load capacity, making them an excellent choice for heavy-duty machines. Bevel gearing is also popular in mechanical transmission systems, such as those found on tractor transmission systems. Modern harvesters and other agricultural equipment require high-performance gearboxes to maintain efficient performance. To meet these requirements, agricultural equipment OEMs trust the Bevel gearboxes manufactured by CZPT Gearbox Company.
Unlike conventional worm gears, bevel gears use multiple shafts to transmit power. The bevel gears have three types of shafts, namely, hollow, projecting, and double-extended. In addition to being hollow, bevel gears can have additional shafts installed opposite the input shaft. They are available in a standard mount, aluminum housing, and three shaft types: double-extended, hollow, and projecting.
Agricultural bevel gearboxes are typically made from closed-grain cast-iron, although higher-sized models are made from SG 500/7 material. The screw is made from Cr-Mo medium carbon steel, which is hardened and tempered to maintain high core strength. A tapered roller bearing is mounted in the housing and is designed to carry heavy axial and radial loads. These gearboxes are also widely used in mixing, distribution, and cleaning machinery.
Bevel gearboxes for agricultural equipment are primarily used in agricultural machinery applications. Agricultural machinery often uses a PTO to transmit torque, but can only provide it at low speeds. Because of this, gearboxes are used for low-speed, massive-torque applications. Soil preparation and crop treatment are two common uses for these gearboxes. They are also useful in cement mixers.

Surface finish

In engineered gearboxes, the surface finish of the gear tooth surfaces is critical for smooth operation. Microscopic examination of gear tooth surfaces reveals a fine, unidirectional pattern. Traditionally used finishing methods include hob shaving, gear grinding, and honing. These techniques can improve the overall finish, but they also have their drawbacks. To overcome these problems, manufacturers use modern machine tooling techniques.
Agricultural gearboxes must be free from casting defects and mechanical damage. The processing surface must be flawless, with the ellipticity of the shaft hole no greater than 0.02 mm, and the centerline unevenness of the shaft holes is less than 0.015 mm. The relationship between shafts and bearing housing must be within 0.6 mm. These standards are crucial for the operation of agricultural machinery gearboxes.
Earlier, the gears were made of H11 and H13 tool steel, which progressively weakened after 20 gears. The tempering temperature is five to seven degrees Celsius or ten degrees Fahrenheit, depending on the steel used. To address this problem, Alloy 718 was developed. The alloy improved the life of die inserts, which reduced the overall cost. Further, the improved surface finish of agricultural gearboxes helped the customers reduce operating costs.
agriculturalparts

Ellipticity

A number of tasks require the use of an agricultural gearbox. These tasks can range from gardening to maintaining green spaces. These gearboxes transmit power from the input shaft to the output shaft, facilitating the change in direction, speed, or rotation. A quality gearbox is vital for the performance of agricultural machinery. Consider the type of operation you will be performing before buying one. You will also need to decide whether you will lubricate it.
An CZPT P/L Gearbox is one of their products. The company offers a full line of agricultural gearboxes at competitive prices. These gearboxes are designed to reduce input shaft speed and increase the PTO speed. The PTO Speed Reducer/Increaser is specially designed for this application. It helps maintain the original rotation of the PTO output shaft. It is suitable for various agricultural applications, including harvesters, balers, and cultivators.
An agricultural gearbox has an elliptic nature. It rotates around an axle core 90 degrees to create a bias state. The axle core of an agricultural gearbox rotates at a 90-degree angle to keep the shaft of the farming arbor in a neutral state. The bias state reduces the rotary driving force and reduces the amount of energy used in the operation. If a gearbox is designed correctly, it will keep a desired rotation torque.

Bearings

Agricultural gearboxes require high-quality bearings, and the global market is undergoing a transformation as more agricultural equipment becomes mechanized. The demand for bearings in agricultural equipment is expected to increase in the future, as cropping cycles will become shorter, and machinery will be used more intensively. Consequently, the wear on agricultural gear teeth and bearings will increase. This will result in a higher replacement rate for these parts.
Agricultural gearboxes must be able to withstand the high demands placed on them by the mounted farming implements. Harrows are a common example, and their disc-shaped attachments work to mix the top layer of soil. Because of their high demands, they must rotate continuously, and no matter what the terrain, they must be easy to run. Moreover, customised bearings will provide better seals.
In a study of 53 different agricultural gearboxes conducted by CZPT UK, they simulated 73 gear selections to find the right type of bearing. The simulation model took four weeks to set up and seven hours to run. As a result, CZPT always selects the “best bearing for the job” – a fitting solution. As such, CZPT understands the end user’s needs.
agriculturalparts

Quality of materials

Agricultural gearboxes play a vital role in the production of food. With the world’s population increasing, the need for food will also increase, and that means a greater need for efficient gearboxes. To make this happen, gearboxes must be able to withstand a variety of environmental conditions, including high and low temperatures, operation in arid and moist environments, and safety regulations.
A bevel gearbox has spiral bevel pinions that transmit rotational power to the axle. It is used in a variety of agricultural applications and is available in a range of ratios, horsepower, and configurations. This right-angle gear drive is widely used in portable grain elevators and grain carts. It has a 15-mm shaft diameter and is compatible with offset rotary fillers and hollow output shafts.
The gear box of a tractor is usually made of grey cast iron. Grey cast iron is a great choice for this component because it provides good wear resistance and vibration dampening. Belt pulleys are also made from grey cast iron. Large belt pulleys are made by casting processes. Similarly, the brake drum material needs to be high-quality to be effective. It is generally made of grey iron ASTM A48 Class 35.
China Homwing The Newest Small Size Hst-IV Series Harmonic Reducer Gearbox with Great quality
editor by czh 2023-04-03

gearbox agricultural

As one of leading gearbox agricultural manufacturers, suppliers and exporters of mechanical products, We offer gearbox agricultural and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox agricultural.