Highest dress in resistance obtainable by sealing grease between pins and bushings
The sturdiness of chain is significantly improved considering the fact that grease is sealed among the pins and bushings by O-rings. The O-ring chain will be the most dependable model from the Ultimate Life Chain Series with its excellent dress in resistance even while in the conditions or environments in which chain servicing is difficult.
Encouraged uses.
?Conditions wherever frequent chain replacement is required due to put on stretch
?Circumstances the place lubrication during the services is unattainable
?In an setting with a great deal soil, sand, dust, and so forth.
?Applications that require power larger than that of the sintered bushing roller chain
Other features
?Cutting down noise. (The noise degree is three dB lower in contrast to conventional roller chains.)
?Cutting down vibration with all the friction produced by O-Ring. (The energy loss because of the friction is almost negligible, since the frictional force between the pins and bushings is for generally from the applications.)
Selection of chains
The strength of an O-ring chain is almost exactly the same as that of a regular roller chain. (Because the pins are longer than those of conventional roller chain, the typical rupture strength is slightly reduced.)
For choosing a suitable chain, refer to “Selection of Chains” .
Once the support ambient temperature is higher than 80° C, particular heat resistant O-rings should be made use of. In this case, get hold of us for extra details.
Connecting links and offset hyperlinks
Two types of connecting links can be found: clearance fit and interference fit. When higher power or sturdiness is required, use interference-fit connecting hyperlink. Only 2POJ is obtainable since the offset website link for all sizes.
Sprockets
O-ring chain employs longer pins than a regular roller chain. When employing multiplex O-ring chain, the conventional sprocket for multiplex chains can’t be made use of.
Caution
O-ring chain just isn’t suggested in applications wherever solvents or other substances may perhaps attack “Nitric Rubber”. Distinctive materials O-rings are also out there for these problems: Please check with us for information. On the whole, “Nitric Rubber” is broken by get in touch with using the following chemical resources.