worm motor

Worm drive gearbox with motor
worm motor
A robust worm-travel gearbox powered by an MM28 electric motor. Ideal applications where an easy to match, high torque result is required. Ideal for student based projects including robots and buggies.
The machine has been designed so that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The electric motor is snap installed into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for small strolling robots, lifting mechanisms, and additional applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to a few amps, making them perfect applicants for the DRV8833 motor driver carrier. Motor overheating can be caused by excessive stalling, also at suprisingly low voltages. We advise that you use stall-detection sensors, or simply view your robot, to ensure that it doesn’t stall for lots of seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on small threaded end of the shaft, though it is not specifically intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical right position worm geared motors established new standards for reliability, effectiveness and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration today and a really future proof answer. The Ever-Power gear electric motor offers total versatility in mounting options includes shaft, base, face, and flange solutions. The motor terminal box can be mounted in option positions rotated in 90º steps around the electric motor frame offering for unparalleled integration opportunities.
Ever-Power gear motors adhere to UNITED STATES and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total answer for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the alternative for applications requiring a part turn, optional dual output, or an inability for the motor to be back driven. The DC right angle equipment motors are designed for constant and intermittent duty procedure. Our right angle equipment reducers were created with several mounting plate options, making them well suited for a number of DC electric motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are created to generate high torque in a little package size. Worm Equipment Motors are excellent for applications that require a personal- locking or breaking characteristic since the output shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision trim gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Oral Seats / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with one of our Worm Gearheads. EP Products will continue to work with you to create and manufacture a Worm Gear Engine that will optimize the performance of your unique application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Trim / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm electric motor uses a metal gear box for strength and a high torque output. Because of the special mechanical structure of the worm get the engine output shaft is certainly self locking and may not be rotated.
This part runs on the two wire connection and supports direction control in addition to PWM speed control. Ranked voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially display their strength in applications where large gear ratios are necessary. Our worm geared motors happen to be for that reason optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the travel system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each of these has its own unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to fulfill your needs.
Worm gear systems impress with their large power density and compact design. If required, we are able to also supply them with the impressive nsd tupH surface area treatment.
As well as the basic EP casing, you can expect an extensive type of bolt-on parts to customize the product including torque arms, shaft covers and output flanges. These could be easily field installed, but we will also be happy to assemble the individual components for you.
Discover more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear products feature a soft, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes the product ideally suited for severe and demanding industries like food processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or immediate motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides distinct repairing possibilities and enable an easy assembling for the client.
Other drive configurationscan be designed by use of built-about add-ons (e.g. torque arm and result flanges). The housings are created in light weight structure out of aluminium die cast. Electric motor attachment is realised generally through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Get Gearbox with Engine – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm simply no load swiftness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm huge, 40mm high, a robust worm drive gearbox powered by an MM28 motor (included), most ideal for applications where an easy to fit, high torque productivity is required, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most suitable for applications where a simple to fit, high torque outcome is required
Perfect for student based tasks including robots and buggies
Reversible Huge torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible Great torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC electric motor with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that’s, regarding motor without electric, the end result axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole electric motor output shaft relatively-short than general gear motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the home window, door, Mini winch. Ect.
In sumo robot or combat robot competition where huge holding torque’s electric motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is definitely an improved option compared to the spur gear motor. How come worm gear so unique? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the direction of transmission (input shaft vs output shaft) isn’t reversible when working with large reduction ratios, because of the better friction involved between your worm and worm-wheel, when usually an individual start (one spiral) worm is used. This can be an advantage when it is desired to get rid of any likelihood of the result driving the input.”
In other terms, it is difficult to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

This website will certainly offer you with reliable details concerning worm motor.

Tags:

Recent Posts

gearbox agricultural

As one of leading gearbox agricultural manufacturers, suppliers and exporters of mechanical products, We offer gearbox agricultural and many other products.

Please contact us for details.

Mail: sales@gearboxagricultural.xyz

Manufacturer supplier exporter of gearbox agricultural.