Common Description
Outfitted with the zero leak bidirectional checking sole-noid valves, this energy unit is created for that operation of two independent circuits. Which are respectively for that most important and subordinate platforms with the double scissors lift. Two cut-off valves are utilized for reducing the machine manually in case of power reduction. If additional independent circuits are required to your application please speak to us for availability.
Remark: 1. Please talk to our product sales engineer for that distinct pump displacement, motor energy or tank capability.
2. CSA or UL certified motors can be found upon request.
Distinctive Notes
1. The AC motor is of S3 duty cycle, which might only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean the many hydraulic parts concerned before set up of the power unit.
three. Viscosity of the oil shoud be 15~46 cst,and also the oil should be clean and free of charge of impurities,N46 hydraulic oil is encouraged.
four. The power unit should be mounted vertically.
5. Check the oil degree from the tank following the preliminary working of the energy unit.
six. Oil altering is needed just after the original a hundred operation hrs,afterwards after just about every 3000 hrs.